Compound Action, for Sheets up to 1.5 mm

No. 5200, with 1/2" Square Drive, as per DIN 3124/3120 D/3120 C

DIN 3128/Form E 6.3, Drive Outside Hexagon DIN 3126/ISO 1173, L=110 mm

Type DIN 3127/ISO 2351, L=50 mm

DIN/ISO 5254, for External Circlip, Size A1 - A10

ISO 5746, Light American Pattern, Type 45

interchangeable Faces, Hickory Handle

ISO 5749, Swedish Pattern, for any Wire up to N 2000/mm², Type 57

D: 11.0 mm; Total length: 142 mm

D: 12.5 mm; Total length: 151 mm

D: 4.1 mm; Total length: 75 mm

D: 5.2 mm; Total length: 86 mm

D: 5.5 mm; Total length: 93 mm

D: 6.5 mm; Total length: 101 mm

D: 7.0 mm; Total length: 109 mm

D: 7.5 mm; Total length: 109 mm

D: 9.5 mm; Total length: 125 mm

D = 2, 3, 4, 5, 6, 8 mm

DIN/ISO 5234, 45"

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode. priority torque, priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 1237 mm TYPE: DAZ-TA PRO 800 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 20 - 800 Nm CAL. MEASURING RANGE: 80 - 800 Nm WEIGTH: 5810 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

d1 x d2 = 25.5 x 44 mm

With replaceable inserts, Size 4, Center to edge: 56 mm, Nm max.: 35, Drive 9 x 12 mm

With replaceable inserts, Size 2, Center to edge: 81 mm, Nm max.: 18, Drive: 0A

No. 5202, with 1/2" Square Drive, DIN 3124

No. 5201, with 1/2" Square Drive, as per DIN 3124/3120 D/3120 C

d1 x d2 = 18 x 13, L=23 mm, DIN 3129/ISO 2725

D = 4.5 mm, Total length = 80 mm

D = 6.8 mm, Total length = 109 mm

D = 9.0 mm, Total length = 125 mm

D = 1.5 mm, Total length = 40 mm

D = 10.0 mm, Total length = 133 mm

D = 10.5 mm, Total length = 133 mm

D = 3.0 mm, Total length = 61 mm

D = 4.0 mm, Total length = 75 mm

D = 6.5 mm, Total length = 101 mm

D = 7.0 mm, Total length = 109 mm

D = 8.0 mm, Total length = 117 mm

Gun Metal Finish

L=2 1/8", D=0,437"

Capacity: 200 mm

with interchangeable Faces and Ash Handle

No. 5087, DIN 3122

in plastic box, similar DIN 338 D = 2-8 x 0.5 mm

Similar DIN 7426/ISO 1173, Drive DIN 3126-E 11.2, Short Type, L=55 mm

Drive DIN 3126-E 6.3/ISO 1173

d1 x d2 = 7.2 x 13, L=23 mm

DIN 7424, Drive DIN 3126-E 11.2/ISO 1173, d = 16 mm

DIN 7424, Drive DIN 3126-E 11.2/ISO 1173, d = 25.5 mm

for Cast Steel Pipes