No. 5107, with 3/8" Square Drive, DIN 3124/ISO 2725

DIN 3128/Form E 6.3, Drive Outside Hexagon DIN 3126/ISO 1173, L=90 mm

Size A31G

Chrome plated. The 180° adjustable head remains firm in any position by means of a spring. L 235 mm, Weight 250 gr

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode.priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA PRO 100 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 2 - 100 Nm CAL. MEASURING RANGE: 10 - 100 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

d1 x d2 = 23 x 30 mm, L=38 mm, similar DIN 3129

No. 5202, with 1/2" Square Drive, DIN 3124

D = 10.2 mm, Total length = 133 mm

D = 5.5 mm, Total length = 93 mm

D = 7.5 mm, Total length = 109 mm

Nm max.: 50 Nm, Drive: 0A

Center to edge: 56 mm, Nm max: 280 Nm, Drive: DSG-4

d1 x d2 = 44 x 20, L=62 mm

No. 5137, DIN 3124

DIN 7424, Drive DIN 3126-E 11.2/ISO 1173, d = 17.5 mm

with Fibreglass Handle