D = 1.5 mm, Total length = 40 mm

Drive 4 mm, Outside Hexagon, DIN 3126/ISO 1173

L=1 15/16", D=1/4"

D: 12.0 mm; Total length: 151 mm

D: 13.0 mm; Total length: 151 mm

D: 4.0 mm; Total length: 75 mm

D: 4.5 mm; Total length: 80 mm

D: 7.0 mm; Total length: 109 mm

D: 9.5 mm; Total length: 125 mm

D = 2, 3, 4, 5, 6, 8 mm

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 420 mm TYPE: DAZ-TA 250 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 2 - 250 Nm CAL. MEASURING RANGE: 25 - 250 Nm WEIGTH: 1040 g interface (RS232) for PC and/or serial printer.

DIN 911/ISO 2936, Gun Metal Finish, L1 x L2 = 56 x 18 mm

Long Pattern, DIN 911 L/ISO 2936, Gun Metal Finish, L1 x L2 = 250 x 45 mm

D = 12.0 mm, Total length = 151 mm

D = 6.0 mm, Total length = 93 mm

D = 8.0 mm, Total length = 117 mm

D = 4.5 mm, Total length = 80 mm

D = 7.5 mm, Total length = 109 mm

A=500, B=495, C=23, D=20, E=88, F=250 mm, Clamping Style B

A=450, B=460, C=29, D=20, E=88, F=150 mm, Clamping Style A

A=125, B=138, C=21, D=10, E=57, F=75 mm, Clamping Style A

L=2 9/16", D=1/2"

L=2 9/16", D=9/16"

D = 1 - 10 mm; intervals of 0.5 mm

d1 x d2 = 13 x 8.5, L=28 mm

d1 x d2 = 13 x 11, L=28 mm

d1 x d2 = 9.0 x 13, L=23 mm

DIN 7424, Drive DIN 3126-E 11.2/ISO 1173, d = 20 mm

Actuation DIN 3121, for internal TORX Screws, d=25 mm, L=60 mm

L=190 mm