No. 5105, with 3/8" Square Drive, DIN 3124/ISO 2725

L=15/16", P1=1,2 mm, P2=6,5 mm

L=3 1/2", D=5/32"

L=3 1/2", D=17/64"

L=3 1/2", D=1/8"

L=1 15/16", D=5/32"

Type DIN 3127/ISO 2351, L=85 mm

L=1"

Chrome plated. The 180° adjustable head remains firm in any position by means of a spring. L 160 mm, Weight 70 gr

With wider Collar Diameter for better Fitting of Sockets, DIN 7428/ISO 3317

DIN 838/ISO 10104, Chrome Plated

Safe control of torque values is done easily with the electronic SALTUS torque wrench DDS-N. The wrench fulfills DIN EN ISO 6789 requirements and because of its design and uncomplicated handling perfectly suited for use in workshops. Functionally the DDS-N concentrates on the essential necessities in application: safe tightening torques for screw fastenings. Unique is our success to offer this battery driven tool at very low price level with optimized quality. After the tool is switched on the screw is simply tightened and the measure function displays the peak value. When reaching the peak measurement the LED flashes and a buzzer sounds. After pressing the zero button the wrench is automatically reset and you can start a new measurement. The integrated battery control avoids insufficient power supply Technical data: · Automatic offset detection · Power saving function by automatic power switch-off · Operating time with fully charged battery: 8 hrs. · Charging time of battery: 14 hrs. · NiMh battery has memory failure · Measurement range 2 - 220 Nm · Precision grade according to DIN EN ISO 6789: +/- 4% · LED green: new measurement can be adjusted · LED flashes red and Buzzer: peak measurement is reached · incl. CHARGER

No. 5107, with 3/8" Square Drive, DIN 3124/ISO 2725

No. 5107, with 3/8" Square Drive, DIN 3124/ISO 2725

with Polished Ash Handle, DIN 1041

The cameover Torque wrench TTI is for use on production lines, without setting scale, for tightening: single sided clockwise. The impulse can be used to control the assembly-line. Model: TTi 30 Micro Axial Working range: 5 - 30 Nm accuracy of measurement: +/- 4 %

27 x 88 mm

60 x 150 mm

Center to edge: 17.5 mm, Nm max.: 14, Drive: 9x12 mm

Center to edge: 20 mm, Nm max.: 115, Drive: 9x12 mm

With exchangeable Bits, Holder 3/4" x 15.9-6 pt., Screwdriver Bit 15.9-6 pt., d1 x d2 = 44 x 32 mm

with Interchangeable Square Inserts, Chrome Plated

with Interchangeable Square Inserts, Chrome Plated

with Hickory Handle

with Hickory Handle

with Hickory Handle

Drive DIN 3121/ISO 1174, d1 x d2 = 34 x 22