L=3 1/2", D=3/16"

L=2 3/4", D=3/16"

L=3 1/2", D=1/4"

L=2 3/4", D=1/4"

L=3 1/2", D=1/4"

L=3 1/2", P1=0,035", P2=0,213", D=0,213"

DIN 896 B/ISO 2236, tubular, Chrome plated

DIN 838/ISO 10104, Chrome Plated

DIN 838/ISO 10104, Chrome Plated

DIN 838/ISO 10104, Chrome Plated

DIN 838/ISO 10104, Chrome Plated

DIN 3110/ISO 3318, Chrome Plated, L=235 mm

Type F

Safe control of torque values is done easily with the electronic SALTUS torque wrench DDS-N. The wrench fulfills DIN EN ISO 6789 requirements and because of its design and uncomplicated handling perfectly suited for use in workshops. Functionally the DDS-N concentrates on the essential necessities in application: safe tightening torques for screw fastenings. Unique is our success to offer this battery driven tool at very low price level with optimized quality. After the tool is switched on the screw is simply tightened and the measure function displays the peak value. When reaching the peak measurement the LED flashes and a buzzer sounds. After pressing the zero button the wrench is automatically reset and you can start a new measurement. The integrated battery control avoids insufficient power supply Technical data: · Automatic offset detection · Power saving function by automatic power switch-off · Operating time with fully charged battery: 8 hrs. · Charging time of battery: 14 hrs. · NiMh battery has memory failure · Measurement range 2 - 100 Nm · Precision grade according to DIN EN ISO 6789: +/- 4% · LED green: new measurement can be adjusted · LED flashes red and Buzzer: peak measurement is reached · INCL. CHARGER

Electronic torque wrench with displaying of current status via RGB-LED´s and graphical display. Depositing and processing up to 50 sequences und 50 joint-settings. Administration of up to 50 tools with different extensions. MEASURING METHOD: torque trackmode, unfix, breakaway-point detection mode. BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm ACCURACY: + -1% in accordance with DIN 6789, UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 1340 mm TYPE: DAZ-T PRO 800 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 20 - 800 Nm CAL. MEASURING RANGE: 80 - 800 Nm WEIGTH: 6000 g interface (RS232) for PC and/or serial printer.Optional available with radio-interface

Short-trave mechatronic clicking torque wrenches. Standard version includes easily adjustable tool length compensation, DATA MODULE in 868 (910/920) MHz range and charging station. Factory set torque level on request. Universal connection for open-jaw, ring,angle and rachet tools Measuring range from 5-50 Nm Permanent online documentation of all click and maximum readings Long service lifetimes due to low power management makes it ideal for 3-shift operation Model: DCM-0 Input Drive: 9 x 12 mm Length: 260 mm Working range: 5 - 50 Nm Weight: 500 g

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA 50 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 1 - 50 Nm CAL. MEASURING RANGE: 5 - 50 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 736 mm TYPE: DAZ-TA 500 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 10 - 500 Nm CAL. MEASURING RANGE: 50 - 500 Nm WEIGTH: 3000 g interface (RS232) for PC and/or serial printer.Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode.priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours TOOL DETECTION: optional available ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 420 mm TYPE: DAZ-TA PRO 250 TOOL ADAPTOR: 14 x 18 mm OPERATING RANGE: 2 - 250 Nm CAL. MEASURING RANGE: 25 - 250 Nm WEIGTH: 1000 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

With replaceable inserts. Size 3, Center to edge: 44 mm, Nm max.: 70, Drive: DSG-1

With replaceable inserts. Size 5, Center to edge: 51 mm, Nm max.: 100, Drive: DSG-1

d1 x d2 = 38 x 30, L=38 mm, DIN 3129/ISO 2725

Gun Metal Finish

Gun Metal Finish

W=108, L=170, H=63.3 mm, Weight: 7.65 kg. Magnetic material: Alcomax III

W=69.85, L=101.6, H=95.25 mm. Weight: 7.92 kg. Maximum champing forces: top face (flat surface): 200 kg, bottom face (flat surface): 150 kg.

The cameover Torque wrench TTI is for use on production lines, without setting scale, for tightening: single sided clockwise. The impulse can be used to control the assembly-line. Model: TTi 30 Micro Axial RF Working range: 5 - 30 Nm accuracy of measurement: +/- 4 %

Head length: 47 mm, Nm max.: 300 Nm, Drive: DSG-5

Head length: 63 mm, Nm max.: 490 Nm, Drive: DSG-5

Head length: 40 mm, Nm max.: 80, Drive: DSG-1

Quick Change Chuck to push onto the Square Adapter of the Power Screwdriver to take Sockets for Wrenches with Hexagon Insert Bits, d=33 mm, L=45 mm

Height: 40 mm, Center to edge: 21 mm, Nm max.: 240, Drive: DSG-3

with Interchangeable Square Inserts, Chrome Plated

with Interchangeable Square Inserts, Chrome Plated

Drive DIN 3121/ISO 1174, d1 x d2 = 32 x 25

Drive DIN 3121/ISO 1174, d1 x d2 = 32 x 22

Drive DIN 3121/ISO 1174, d1 x d2 = 22 x 22

Drive DIN 3121/ISO 1174, d1 x d2 = 32 x 22

Drive DIN 3121/ISO 1174, d1 x d2 = 45 x 30

Drive DIN 3121/ISO 1174, d1 x d2 = 34 x 30

Drive DIN 3121/ISO 1174, d1 x d2 = 34 x 22

Drive DIN 3121/ISO 1174, d1 x d2 = 34 x 22

Drive DIN 3121/ISO 1174, d1 x d2 = 34 x 22

with interchangeable Faces, Ash Handle

L=250 mm; 6 x 7 - 14 x 15 mm

Basic tool with capacity for interchangeable inserts. For repair and maintenance. Torque range 40-200 Nm, 30-140 ft.lb. Division of scale: 10 Nm, 10 ft.lb. Drive 14x18 mm