Without Fixing Device, Drive DIN 3126-E 11.2/ISO 1173, d = 18 mm, L = 100 mm

Without Fixing Device, Drive DIN 3126-E 11.2/ISO 1173, d = 23 mm, L=150 mm

Without Fixing Device, Drive DIN 3126-E 11.2/ISO 1173, d = 27 mm, L=100 mm

Without Fixing Device, Drive DIN 3126-E 11.2/ISO 1173, d = 30 mm, L=100 mm

L=3", D=3/16"

Drive: DIN 3126 D4

Drive: DIN 3126 D4

L=1 15/16", D=5/32"

for Stranded Copper and Alu Cable up to 150 mm², Blade Opening 30 mm

DIN/ISO 5746, Type 58

DIN 3113/ISO 3318, Form A, 15° Offset, Chrome Plated

DIN 838/ISO 10104, Chrome Plated

DIN 838/ISO 10104, Chrome Plated

Electronic torque tester PRG-E. The special construction makes it the prefered wrench for mass producers. Controlling of min- and maximum torque values with LED´s.Internal memory for 1,000 values and RS 232 interface for Printer or PC. Indication scale: 1 Nm, Accuracy: + - 1%, Dimensions: 120 x 80 x 182 mm Model: PRG-E2 Output Drive: 3/4 '' Working range: 50 - 500 Nm Weight: 3200 g

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing 1 sequence and 25 joint-settings. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, torque or angle BOLTS/JOINTS: 25 (via software) SEQUENCES: 1 (via software) TOOLS: 1 USER LEVEL: 3 LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 1000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA 50 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 1 - 50 Nm CAL. MEASURING RANGE: 5 - 50 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

Electronic torque wrench with integrated angle measurement. Display of current status and preset point via RGB-LED´s and graphical display. Display of torque and angle at the same time. Depositing and processing up to 50 sequences and 50 joint-settings. Administration of up to 50 tools with different extensions. Rehit (double hit) detection. MEASURING METHOD: torque/angle, torque, trackmode, prevail/dynamic torque (hard joint), unfix, torque or angle, Yield-point detection mode.priority torque,priority angle, prevail/dynamic torque (soft joint) CURVE STORAGE: 5 curves for joint analysis (max. 12s each) BOLTS/JOINTS: 50 SEQUENCES: 50 TOOLS: 50 USER LEVEL: 3 STATISTICS: standard deviation, Cp value, Cpk value LANGUAGES: german, english and french OR, spanish, english and italian DATA MEMORY: 4000 POWER SUPPLY: 3 pc. 1.2V - Storage battery (NiMH AA ) for 8 hours ALARM BY VIBRATION: optional available ACOUSTIC SIGNAL: optional available RESOLUTION: 0,01 Nm; 0,01 degree ACCURACY: + -1% in accordance with DIN 6789, + -1% to 1 rpm based on 6°/sec. similar to VDI/VDE 2648 UNITS: Nm, cNm, lbft, lbfi, ozf, kgf cm, kgf m DIMENSIONS: 53 x 36 x 396 mm TYPE: DAZ-TA PRO 100 TOOL ADAPTOR: 9 x 12 mm OPERATING RANGE: 2 - 100 Nm CAL. MEASURING RANGE: 10 - 100 Nm WEIGTH: 890 g interface (RS232) for PC and/or serial printer. Optional available with radio-interface

For Sockets 11-6 pt., L=35 mm

with Spring, Straight, Rectangular Points with Lateral Slot, Size A0S

with Spring, Straight, Rectangular Points with Lateral Slot, Size A3S

A=501, B=501, C=22, D=19, E=69, F=301, Pole Pitch = 35 mm

A=400, B=413, C=23, D=15, E=72, F=200 mm, Clamping Style A

A=150, B=158, C=23, D=19, E=65, F=150 mm, Clamping Style A

A=760, B=790, C=35, D=25, E=100, F=457, Pole Pitch = 40 mm

A=500, B=495, C=23, D=20, E=88, F=250 mm, Clamping Style B

A=501, B=501, C=19, D=19, E=66, F=151, Pole Pitch = 32 mm

A=600, B=595, C=23, D=20, E=88, F=250 mm, Clamping Style B

A=250, B=258, C=23, D=15, E=65, F=150 mm, Clamping Style A

A=200, B=213, C=23, D=15, E=65, F=100 mm, Clamping Style A

A=406, B=406, C=22, D=19, E=69, F=251, Pole Pitch = 35 mm

Quick Change Chuck to push onto the Square Adapter of the Power Screwdriver to take Sockets for Wrenches with Hexagon Insert Bits, d=35 mm, L=55 mm

Height: 40 mm, Center to edge: 30 mm, Nm max.: 100, Drive: DSG-1

Center to edge: 31 mm, Nm max.: 240 Nm, Drive: DSG-3

Serrated Points

Drive DIN 3121/ISO 1174, d1 x d2 = 52 x 30

Drive DIN 3121/ISO 1174, d1 x d2 = 52 x 30

Drive DIN 3121/ISO 1174, d1 x d2 = 34 x 30

interchangeable Faces, Hickory Handle